PROZIS sCore User Manual page 8

Wearing the equipment
1. Fully remove your equipment from its packaging.
2. Moisten the strap's contact areas with water or ECG gel (available at pharmacies).
3. Adjust the chest belt so that it fits snugly directly below the chest muscles.
4. Attach the heart rate sensor to the strap, with the
right-hand side. The contact areas must be in constant contact with the skin, and the chest
belt securely in place. After you have exhaled completely, the belt should still exert slight
tension on your chest. Make sure that the moist electrode areas are pressed against the
skin and the Prozis logo on the sensor is in a central, upright position. Position the equip-
ment as shown in the figure.
5. After a
beep-beep
the sensor is correctly in place and the heart rate has been detected.
BT Pairing
Connecting your equipment via BT can only be done when it is being worn correctly as
explained above. When the device is not worn, it will be in sleep mode and cannot be found
via BT.
Install the Prozis Go app as shown in the figure, and follow the app's instructions to pair your
new device.
Download the Prozis
Go app from the Apple
App Store® or Google
Play Store®.
sound is heard twice, the LED light will blink green, indicating that
on the left-hand and the
L
EN
on the
R
8