Input Capacity; Making Corrections During Input; Replay Function - Casio fx-100W User Manual

• You cannot set the angle unit or the display mode while
the calculator is in the 8ASE-N mode.
• The COMP, CMP LX. SD; and REG modes can be used
in combination with the angle unit modes.
• Be sure to check the current calculation mode (SD, REG,
GOMP, CMPLX) and angle unit mode (DEG, RAO, GRA)
before beginning a calculation,
■ Input Capacity
• The memory area used for calculation Input can hold 79
''steps," Whenever you input the 73rd step of any calcu¬
lation, the cursor changes fromto 'W' to let you know
memory is running Iqw, if you still need to input more,
you should divide your calculation into two or more parts.
■ Making Corrections During Input
• Use ® and ®: to: move the cufsor to the location you
...want.
• Press ® to delete, the number or function at the current
cursor position.
• Press.®l.Ga§ to change to an insert cursor []. Inputting
something while the insert cursor is on the display in¬
serts the input at the insert cursor position.
• Press* 90; ®, or O returns to the normal cur¬
sor from the insert cursor.
■ Replay Function
• Pressing:®: or SI recalls the last calculation you per¬
formed. You can then make any: changes you want In
the calculation and re-execute it
• PressingGS does notdear Replay memory, so you can
recall the last calculation even after you press GS
• Replay memory is cleared whenever you start a new
calculation, change to another mode, or turn off power.