For the sake of clarity, this operation manual may not constitute a detailed use of Lorenz Messtechnik GmbH devices in all possible applications. Also, not all possible types of installation, operation and maintenance are considered.
It is also pointed out that all obligations of Lorenz Messtechnik GmbH are exclusively arising from the respective sales contract in which the warranty is conclusively settled. Intended Use Lorenz Messtechnik GmbH devices may only be used for measurement tasks and the directly related control tasks.
Obere Schloßstr.131 LORENZ MESSTECHNIK GmbH +49 7172/93730-0 D-73553 Alfdorf Fax +49 7172/93730-22 Safety and Caution Symbols If residual risks occur while working with the device, the following symbols in this operation manual must be noted: Warning: Warns of a potential risk of serious life-threatening injuries. The accident preven- tion regulations of the employer’s liability insurance association must be consid-...
Fax +49 7172/93730-22 Continuative Documents Following documents contain reference information about the DIN Mounting Rail Limit Value Evaluation GM 44 080642.pdf data sheet of the DIN Mounting Rail Limit Value Evaluation GM 44 E-Mail: info@lorenz-sensors.com Technical changes are under reserve...
Introduction Product Description The DIN Mounting Rail Limit Value Evaluation GM 44 is universally applicable as a fast limit value ex- tension with an input of ±10V. The slim housing shape allows space-saving installation in control cabi- nets on standard DIN mounting rails. A closing contact for each limit value is available. The set point can be adjusted from -10V to +10V via a pot.
Obere Schloßstr.131 LORENZ MESSTECHNIK GmbH +49 7172/93730-0 D-73553 Alfdorf Fax +49 7172/93730-22 Interfaces and Connections Voltage input: ±10V Voltage output: ±10V Contact connection: PhotoMos Relais Note: The device must be disconnected from mains during all connection work. The safety precautions must be observed.
Obere Schloßstr.131 LORENZ MESSTECHNIK GmbH +49 7172/93730-0 D-73553 Alfdorf Fax +49 7172/93730-22 Product Phases Transportation Note: Please pack the equipment suitable for transportation The equipment may not be able to move back and forth in the package Please protect the equipment against moisture...
The device does not contain any parts which must or can be serviced by the user. Repairs may be carried out by Lorenz Messtechnik GmbH, exclusive- ly. If assuming that safe operation of the device is no longer possible, it must be taken out of service and secured against inadvertent operation, immedi- ately.