Advertisement
Quick Links
Step 1: Printer Driver
Installation
®
For Windows
7, 8, 10 (32 and 64 bit)
Notice:
Step by Step Guide
Notice:
• Turn The TTPCardMAX Off
• The printer must not be connected to the PC.
• Unplug the USB cable from the printer
Driver Installation
• Copy the content of the Usb-Stick on the PC
• Select the sub-folder \ TTPCardMAX
• Execute Setup Program
• Continue the Installation
• Press Next
Printer TTPCardMax Startup and Software ContaprintMAX Setup– rel 1.0
TTPCardMax Quick Startup Guide
The installation continues, it can take a few
minutes.
•
Press "Install this Driver software anyway"
• A Restart of the PC is requested.
Notice:
Automatic Plug and Play TTPCardMAX
• Restart the PC
• Insert Strong-Black ribbon
• Turn TTPCardMAX On
• Wait until TTPCardMAX must be ON LINE
After a few seconds a "new hardware
found" message appears.
The P-PRINTER is detected and added.
• From Start
• Select "Settings"
• Select "Devices"
• Select
The "P-PRINTER" appears:
Step 2: Automatic Creation
of 8 Devices in Windows
Notice:
• The TTPCardMax Installation requires the
creation of 8 different Printer Devices.
• The creation process is Automatic
• Copy the content of the Usb-Stick on the PC
• Select the sub-folder \ TTPCardMax
• Select the sub-folder \ ENG
• Select the sub folder \ TTPCardMax COPY DRIVER
ENG
• Execute PPRCOPY.exe
• Press Ok to proceed
• Press Ok to Complete the Installation
1/5
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CONTACLIP TTPCardMax
Summary of Contents for CONTACLIP TTPCardMax
- Page 1 • Copy the content of the Usb-Stick on the PC • Select the sub-folder \ TTPCardMax • Select the sub-folder \ ENG • Select the sub folder \ TTPCardMax COPY DRIVER • A Restart of the PC is requested. Notice: •...
- Page 2 • Select Menu File • Select menu Printer Setup. • Press Next to proceed. The ContaprintMAX Software is installed in the default folder c:\Contaclip\ContaprintMAX The List of the 8 TTPCardMax Printer Devices The ContaprintMAX icon appears appears. Printer TTPCardMax Startup – rel 1.0...
- Page 3 SINGLE T-BLOCKS SINGLE T-BLOCKS AUTO MODE AUTO MODE HORIZ. HIGH TEMP HORIZ. HIGH TEMP To the bottom HORIZ. LOW TEMP HORIZ. LOW TEMP VERT. HIGH TEMP VERT. HIGH TEMP VERT. LOW TEMP VERT. LOW TEMP Printer TTPCardMax Startup – rel 1.0...
- Page 4 Type in a negative To the Bottom value for the Y axis To the Right Type in a positive value for the X axis To the Left Type in a negative value for the X axis Printer TTPCardMax Startup – rel 1.0...
-
Page 5: Troubleshooting
“Now receiving” from a before the printer has started and Press enter plate / feeder empty Enter preceding print to print. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries Printer TTPCardMax Startup – rel 1.0...
Need help?
Do you have a question about the TTPCardMax and is the answer not in the manual?
Questions and answers