Smeg MI20X Owner's Instruction Manual page 4

INSTALLATION
1. Make sure all the packing materials are removed
from the inside of the door.
2. Inspect the oven after unpacking for any visual
damage such as:
Misaligned Door
Damaged Door
Dents or Holes in Door Window and Screen
Dents in Cavity
If any of the above are visible, DO NOT use the
oven..
WARNING-THIS APPLIANCE MUST BE EARTHED.
1. The plug socket should be within easy
reach of the power cord
2. This oven requires 1.5 KVA for its input.
consultation with service engineer is
suggested when installing the oven.
The wires in this mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains leads of the appliance may not correspond with the coloured
markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol coloured green of green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
3. This Microwave Oven weighs 15.5 kg and must
be placed on a horizontal surface strong enough
to support this weight.
4. The oven must be placed away from high
temperature and steam.
5. DO NOT place anything on top of the oven.
6. DO NOT remove the turn -table drive shaft.
7. As with any appliance, close supervision is
necessary when used by children.
CAUTION:This oven is protected internally by
ac 250V, 8 Amp Fuse.
IMPORTANT
Green-and-yellow :
Blue :
Brown :
4
Earth
Neutral
Live