Smeg LSA12XD9 Instruction Manual page 12

PROGRAMME,
NUMBER & SYMBOL
1
SOAK
2
LIGHT
BIO (*)
3
EN 50242
4
NORMAL
ULTRA
5
CLEAN
(***)
Only run the soak program with half loads.
The "3/1" (6), HALF LOAD WASH (8) and DELAYED START (10) options cannot be
used with the soak program.
Reference program as per EN 50242 standard.
(*)
(**) See energy label.
(***) The "ULTRA CLEAN" program terminates with an anti-bacteria rinse that
ensures a further reduction in the bacteria level. If the temperature falls during
this stage of the program (e.g. because the door is opened or due to a power
blackout), the program lights (2) flash to warn that the anti-bacteria effect is
not guaranteed.
(1) Average power consumption with the softener set on level 2..
(2) The cycle duration and power consumption may vary according to the water
and room temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
User instructions
LOAD CROCKERY
AND CUTLERY
Pans and dishes
awaiting completion
of the load.
Delicate dishes with
light dirt.
Dishes with normal
dirt, even with dried-
on residues.
Dishes with normal
dirt, even with dried-
on residues.
Very dirty pans and
dishes, even with
dried-on residues.
DURATION
PROGRAM
MINUTES
PROGRESS
Cold prewash
Wash at 45°C
Cold rinse
Rinse at 70°C
Dry
Cold prewash
Wash at 50°C
Rinse at 66°C
Dry
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 70°C
Dry
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
CONSUMPTION
WATER POWER
(2) LITRES KWh (2)
(1)
15' 4 0,03
80' 10 1,00
180' (**)
90' 17 1,30
18 1,72
140'
(**)
11