Smeg LB 1001 User's Book Manual page 15

MODEL: WLB 801 - LB 801
MAIN FUNCTIONS OF THE WASHING MACHINE
USING THE WASHING MACHINE
WASH CYCLE
(follow these instructions and the washing machine will run the selected wash cycle)
1. Open the door (see paragraph "Using the washing machine").
2. Load the washing in the drum and close the door securely.
Warning: Do not overload the washing machine. It is not advisable to wash items that
absorb large quantities of water such as carpets.
3. Add a low-suds detergent and softener designed for automatic washing machines in the
respective compartments of the detergent dispenser (see chapter "USE OF
DETERGENTS").
4. Close the detergent drawer. Do not open the drawer while the machine is working as
this may cause water to spill out.
5.
Press the On/Off button (A).
6.
Rotate the programmer knob (P) to select the required program and temperature according
to the type of fabric to wash (see: "
and the cycle will start.
N.B. As the program is being executed, this symbol (S) will change to indicate the
current wash phase. On completion of the wash program, the word END will be displayed.
7. Select the required spin speed by pressing button (H) (see "
8. Select the (C) buttons with the functions required (see "
pressed will light-up.
9. Press button (I) if required (see "DELAYED START").
10. Press button (L) to start the wash cycle.
11. At the end of the wash, press the On/Off button (A) to switch off the washing machine.
12. Open the door and remove the washing.
13. With dry hands, unplug the washing machine from the mains supply.
14. Close the water feed valve.
VARIABLE SPIN:
The machine offers a wide selection of spin speeds that can be selected beforehand
according to the wash program. To change the spin speed, simply press button (H) to
select the required speed. The corresponding speed led will light-up each time the
max
button is pressed. To exclude the spin, select the led corresponding to symbol
700
present, or the writing "no-spin".
500
NB. the maximum spin speed will vary according to the model and is indicated by the Leds on the machine. The
maximum spin speed that can be selected for each programme is indicated by the leds that light-up automatically
when the wash programme is selected.
Load imbalance check during spinning:
This washing machine is fitted with a special electronic load balancing control system.
Before each spin, the system makes sure that the clothes are distributed as uniformly as possible
in the drum. If the washing is not distributed uniformly, the final spin speed is reduced for safety
reasons, while if the load is drastically out of balance, the spin is not effected.
• WLB 1001 - LB 1001
B D S P
I H C
L
:
PROGRAMME TABLES
SM1638
A On/off button
B Delayed start indicator led
C Optional function buttons
D Spin speed indicator leds
H Spin selector knob
I Delayed start button
L Start button
P Programme and temperature knob
A
S Programme status led
"), then press the start button (L)
VARIABLE SPIN
OPTIONAL FUNCTIONS
").
"). The buttons
, if
GB