Remove them from the box with care. Open the hood upper glass panel (Fig.1). Fig.1 Take the glass panel with the SMEG logo close to the hood and centre the four hinges in their seats (Fig.2). Let the glass panel slide downwards along the pin guides (Fig.3.2).
Page 3
Removal of filter panels To remove the filters, use the key included in the supply (Fig.5). Fig.5 Place the key as shown in Fig.6. Fig.6 Insert the key prongs in the holes on the upper central part of the panel (Fig.7) .
Page 4
Installation of the filter panels Fig.10 Take the panels close to the hood. Insert the filter pins in the seats as shown in Fig.10 Fig.11 Rotate the panels and take them close to the hood (Fig.11 and Fig,12). Fig.12 Adjustment of glass-closed position Fig.13 Adjust the glass closed position after installing the hood.
Installation instructions Height of the holes for the bracket Level of the Fig.14 Fig.15 a) Fix the hood in the center over the hob; b) Maintain the distances shown at fig. 14 and fig. 15. Reference height for the center of the exhaust hole...