Thank you for choosing this product. WEEE contains both polluting substances (which We are proud to offer the ideal product for can cause negative consequences for the you and the best complete range of home environment) and basic components (which can appliances for your daily routine.
1. GENERAL SAFETY in a safe way and understand the hazards involved. RULES Children shall not play with the This appliance is intended to appliance. Cleaning and user be used in household and maintenance shall not be made similar applications such as: by children without supervision.
Page 5
Do not expose the washing Electrical connections machine to rain, direct sunlight safety instructions or other weather elements. Protect from possible freezing. The technical details (supply voltage and power input) are When moving, do not lift the indicated on the product rating washing machine by the knobs plate or detergent drawer;...
2. INSTALLATION Remove the 2 or 4 transportation screws (A) on the back and remove the 2 or 4 flat washers, rubber bungs and plastic spacer tubes (B) as illustrated in figure 1. If the washing machine is built- unscrew transportation screws (A) and remove the 3 or 4 flat washers, rubber bungs and plastic spacer...
Page 7
Instructions for mounting the furniture door Position the template onto the reverse of the furniture door. It is possible to mount the hinges and closure magnet on the right or left-hand side depending on your requirements. Mark the screw hole positions, then drill out these positions.
Page 8
Mount the furniture door to the front of the washer using the hinges. Fix the spacers (I) in place with the 2 screws (J) and then fix the hinges with 2 screw (H). We suggest mounting the furniture door so that it opens towards the left, which is the same direction as the porthole door.
Page 9
Hydraulic connections Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do reuse old hose-sets). SOME MODELS may include one or more of the following features: HOT&COLD (fig. 4): water mains connection settings with hot and cold water for higher energy savings.
Page 10
Setting The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support.
3. DETERGENT DRAWER WARNING detergent draw split into Some detergents are not designed for compartments as illustrated in figure 9: use in the dispenser drawer but are supplied with their own dispenser that compartment "1": for prewash detergent; is placed in the drum directly. compartment “...
4. PRACTICAL HINTS Maximise the load size Achieve the best use of energy, water, Load tips detergent time using recommended maximum load size. When sorting laundry, make sure: Save up to 50% energy by washing a full load instead of 2 half loads. - have eliminated metallic objects such as hair clips, pins, coins, from laundry;...
Page 13
The use of ecological detergents without When washing heavily soiled whites, phosphates cause following we recommend using cotton programs of effects: 60°C or above and a normal washing powder (heavy duty) that contains - cloudier rinse drain water: This effect is bleaching agents that at medium/high tied to the suspended zeolites which do temperatures provide excellent results.
5. CLEANING AND Remove and clean the filter; when finished, replace it turning it clockwise. MAINTENANCE The filter handle will be locked when it is not possible to turn any further and the Looking after your appliance correctly can handle is horizontal. Smearing a small extend its lifespan.
6. QUICK USER GUIDE 7. CONTROLS AND PROGRAMS This washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times. Program selection Turn on the washing machine and select the required program.
Page 16
START/PAUSE button WARNING Don’t touch the display while inserting Close the door BEFORE selecting the plug because machines button START/PAUSE. calibrates the systems during the first seconds: touching the display, the machine couldn’t work property. In Press to start the selected cycle. this case, remove the plug and repeat the operation.
Page 17
To delay the start use the following - AQUAPLUS procedure: This option (available only in some programmes) allows you to wash the load - Select the required programme. in a much larger quantity of water and this, together with the new combined - Press the delay start button once to action of the drum rotation cycles, where activate it (h00 appears on the display)
Page 18
STEAM PLUS button TEMPERATURE SELECTION button By this option you can add a specific steam treatment to some washing cycles This button allows you to change the (see programme table). temperature of the wash cycles. The steam function relaxes the folds and It is not possible to raise the temperature makes ironing times shorter.
Page 19
5) I-TIME INDICATORS LIGHTS Close the door BEFORE selecting the START/PAUSE button. Once the programme has been selected, the indicator light will automatically show the time set for that programme. When START/PAUSE is pressed on the machine with the door closed, the Selecting a different time the relevant indicator will flash momentarily and then indicator will light up.
Page 21
Please read these notes: INFORMATION FOR THE TEST Maximum load capacity of dry clothes, LABORATORIES according to the model used (see control panel). STANDARD PROGRAMMES ACCORDING TO Only with PREWASH option (EU) No 1015/2010 e No 1061/2010 selected (programmes with PREWASH option available).
Page 22
Rapid 44' Description of programmes A complete washing cycle (wash, rinse and spin). This programme is particularly suited To clean different types of fabrics and to slightly dirty cottons and mixed fabrics. various levels of dirt, the washing machine With this programme it is recommended to has specific programs to meet every need use only 20% of the detergent normally of washing (see table of programmes).
Page 23
be washable at 40°C or 60°C, together in sanitizing effect, setting the temperature at the same cycle. This programme is used to 60°C minimum. To optimize the result of the assess the compliance with sanitizing effect we recommend the use of Ecodesign legislation (environmentally...
8. TROUBLESHOOTING AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems. ERROR CODE FORMAT Models with a display: the error is shown by a number preceded by the letter “E” (example: E2 = Error 2).
Page 25
OTHER ANOMALIES Problem Possible causes and practical solutions The washing machine Make sure the product is plugged into a working supply socket. Make sure power is on. does not work / start Make sure the wall socket is working, testing it with another appliance such as a lamp.
Page 26
It is always recommended to use original By placing the mark on this spare parts, that are available at our product, we are confirming compliance Authorised Customer Service Centres. to all relevant European safety, health and environmental requirements which are applicable in legislation for this Warranty product.