Console Assembly - Weider CLUBSTEPPER SM10 Owner's Manual

PAGE 14 WEDER SPORTING GOODS
STEP 8 CONSOLE ASSEMBLY
46 1/4" X 3/4" HEX HEAD BOLT
|48 1/8" X S/B" PHILLIPS HEAD SCREW ooa |
oE
46
O Position the ELECTRONICS
CONSOLE (17) over the top of the
MAST FRAME (3) and secure in
place by bolting down through the
Console and Into the MAST
FRAME CAP (27) with 1/8" X 5/8"
PHILLIPS HEAD SCREWS (48).
[C] Attach the RESISTANCE SETTING
KNOB (18) to the SQUARE
SHAFT (28) at the top of the MAST
(3) using a 1/4" X 3/4" HEX HEAD
BOLT (46) to bolt down through the
top of the Knob and then into the
Square Shaft.
C] Peel the backing sheet from the
ROUND RESISTANCE DECAL
(62) and attach it in the center of
the RESISTANCE SETTING
KNOB (18).