Troubleshooting - Smeg KLS1256B Instruction Manual

6. Troubleshooting

In case of a malfunction, the dishwasher will warn the user by flashing
the ON/OFF (2) and START/PAUSE (4) lights, in some cases combined
with a continuous beep.
LIGHTS
+ continuous beep
In some cases, the alarm signal may indicate a temporary problem, so
before contacting the after-sales service, proceed as follows.
•
Open and close the door, or switch the dishwasher off and back on,
and if necessary reprogram it.
If the problem persists, contact the after-sales service.
32
User instructions
- The dishwasher is not able to fill or discharge
the tank.
- Temperature sensor disconnected (on some
models only).
- Alternate washing system malfunction (on some
models only).
- Water level at limit (on some models only).
- Anti-flooding system or safety level switch
tripped.
DESCRIPTION