Table of Contents
Advertisement
Display ( _
)
Quick view
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus
[Off]
: The quick view function
can't be activated.
[0.5, 1, 3 sec]: The captured image is
briefly displayed during
the selected time.
SAVE
If you set the [Display SAVE] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
- Sub menus
[Off] : The LCD monitor wilt not be turned off.
[On] : If the camera isn't operated
during the specified time
(about 30 SEC.), the camera
power will be idle (Camera status
lamp:Blinking) automatically.
Formattin_
This is used for formatting the memory. If you run [Format] on
the memory, all images, including the protected images, will be
deleted. Be sure to download important images to your PC before
formatting the memory.
- Sub menus
[No]
: The memory will not be formatted.
[Yes] : Awindow
for confirming the se-
lection displays. Select the [Yes]
menu. A [Processing!]
message
appears and the memory will be
formatted. If you run FORMAT in
Play mode, a [No Image!] mes-
sage wilt appear.
[] Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
-A memory card that has a file this camera can't recognise or
one that has been taken from another camera.
-Always format the memory card using this camera. If you insert
a memory card that has been formatted using other cameras,
memory card readers, or PCs, you wilt get a [Card Errod]
message.
You can't set the [Display SAVE] menu of Playback Mode.
48
Advertisement
Table of Contents
