Making Antenna Connections - Onkyo T-430RDS Instruction Manual

Making antenna connections
ae
3 se SEs
The T-shaped FM antenna is for indoor use
only. Move the antenna in various direc-
tions until the clearest signal is received.
© Bix it with push pins in the position giving
= the Jeast amount of distortion.
A=
hae gable
If the reception is not very clear with the
attached T-shaped FM antenna, the use of
an external antenna is recommended.
a Please make' sure that you comply with the
i following considerations regarding the
location. 3
Keep the antenna away from noise sources
(neon signs, busy roads etc.)
It is dangerous to put it close to power
lines, so keep it well away.
Please refer to the following procedure
when connecting a 75/300 ohm antenna
adapter. (This adapter is included if your T-
430RDS is a worldwide model.)
Connecting the coaxial cable:
1. Prepare the coaxial cable as shown,
2. Using your fingernail or a small
screwdriver, remove the cover.
Connect the 75/300 ohm antenna
adapter to the coaxial cable and replace
the cover.
@ Insert the end of the cable.
® Clamp in place with pliers.
Press down the lever. insert wire. Return the fever.
EE LAL LSS EIS