Subscribe to Our Youtube Channel
Related Manuals for Elura GREEN LABEL Series
Summary of Contents for Elura GREEN LABEL Series
-
Page 3: Installation
• Loopthrough speaker connector • Includes tile bridge Unpacking Carefully remove your new Elura speaker from the box. Inspect the speaker for transit damage. If you discover damage, contact your dealer immediately. Save your carton - it is the best possible protection for your speaker should you ever have a need to move it. - Page 4 Tools You’ll Need • Utility knife, jig saw, or drywall saw • Phillips screwdriver (#2) or cordless drill with clutch and Phillips (#2) bit • Wire cutter and stripper • Tape measure • Level • Pencil • Wire fishing tools •...
-
Page 5: Specifications
• Tighten each mounting screw with a disassembled and/or repaired by manual or power Phillips driver. Do anyone other than Elura or our not over tighten! Over tightening can appointed repair facility. damage the clamps or ceiling materials. If using a drill, set the A unit that fails under conditions other clutch to a low torque (“5”...
Need help?
Do you have a question about the GREEN LABEL Series and is the answer not in the manual?
Questions and answers