Table of Contents
Advertisement
en Basic settings
Basic settings
11 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
for some time even after a power cut.
Basic settings
Language
Time
Display
Brightness
Standby screen
Clock
Adjustment
Factory setting (may vary according to model)
1
Sound
Button tone
Signal tone
Factory setting (may vary according to model)
1
Cleaning aid
12 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by evaporating the soapy water. It is then
easier to remove the dirt.
ATTENTION!
Incorrect cleaning may damage the appliance.
Never pour liquid into the cooking compartment.
▶
14
Selection
See selection on the ap-
pliance
"Time" in 24-hour format
Selection
1
¡ Settings 1 to 8
¡ On (this setting in-
creases energy con-
sumption)
¡ Clock displayed, for
1
set time
¡ Off
1
¡ Digital
¡ Analog
¡ Align the display hori-
zontally and vertically.
Selection
1
¡ On
¡ Off
¡ Very short
¡ Short duration
1
¡ Medium duration
¡ Long duration
Appliance settings
Illumination
Microwave output selec-
tion
Factory setting (may vary according to model)
1
Customisation
Brand logo
Operat. after switch-on
Childproof lock
1
Factory setting (may vary according to model)
Factory settings
Factory settings
Appliance information
11.2 Changing the basic settings
Requirement: The appliance is switched on.
Press "Basic settings".
1.
Press the required basic setting.
2.
Change the required settings on the display.
3.
Use
to return to the overview or go back to the
4.
main menu.
11.3 Changing the time
Requirement: The appliance is switched on.
Press "Basic settings".
1.
Press the "Time" basic setting.
2.
a The display shows the set value.
3.
Use the setting ring to set the hours.
Press the minutes.
4.
Use the setting ring to set the minutes.
5.
6.
Press
.
Use
to return to the overview or go back to the
7.
main menu.
12.1 Setting the cleaning aid
Requirement: The appliance is switched on.
Press "Cleaning".
1.
Follow the instructions on the display.
2.
Press
.
3.
a A signal tone sounds once the time has elapsed.
Follow the instructions on the display.
4.
Selection
1
¡ On
¡ Off
¡ 90 W
¡ 180 W
¡ 360W
¡ 600 W
¡ boost
Selection
1
¡ Display
¡ Don't display
1
¡ Main menu
¡ Microwave
¡ Meals
¡ Available
¡ Deactivated
Selection
¡ Restore
¡ Cancel
¡ Displaying "Appliance
information"
Advertisement
Table of Contents
