Operating Instructions - Cool-Living CL-09HA1 Instruction Manual

OPERATING INSTRUCTIONS

The air sucked by the fan enters from the grill and passes
through the filter, then it is cooled/dehumidified or heated
through the heat exchanger.
The direction of the air outlet is motorized up and down
by flaps, and manually moved right and left by the
vertical deflectors, for some models, the vertical
deflectors could be controlled by motor as well.
SWING or SELF-CLEAN function
1. Press the button SWING to activate the louver,
Press to activate the horizontal flaps to swing
from up to down. Press again to stop the swing
movement at the current angle
Press to active the vertical deflectors to swing
from left to right. Press again to stop the swing
movement at the current angle.
2. If the vertical deflectors are positioned manually
positioned under the flaps, they allow to move the air
flow directly to rightward or leftward.
3. In certain inverter heating models, simultaneously press
the horizontal SWING and vertical SWING buttons to
activate the Self-Clean function.
Note: The Self-Clean function is a pre-set program that
initiates both frosting and defrosting of the indoor
unit to clean the surface of the indoor evaporator.
This adjustment must be made while the appliance
is switched off.
Never position Flaps manually, the delicate
mechanism might be seriously damaged!
Never poke fingers, sticks or other objects in the air
inlet or outlet vents. Such accidental contact with live
parts might cause unforeseeable damage or injury.
.
11
Filter
Heat
flap
movement Vertical Deflectors
Fan
Horizontal Flaps