Technical Data; Product Drawing - ebm-papst K3G630-PC08-03 Operating Instructions Manual

K3G630-PC08-03

3. TECHNICAL DATA

3.1 Product drawing

All dimensions in mm.
1 Installed position: shaft horizontal (install support struts only vertically as illustrated) or rotor on bottom; rotor on top on request
2 Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
(The tightening torque is designed for PVC cables. If the cable materials are different, the tightening torque may have to be adjusted)
3 Tightening torque 1.5 ± 0.2 Nm
4
Inlet ring with pressure tap (k-factor: 438)
5 Attachment holes for FlowGrid 00630-2-2957 (not included in scope of delivery)
Item no. 56607-5-9970 · ENU · Change 209539 · Approved 2021-02-10 · Page 4 / 16
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions