Recording From External Equipment - Panasonic RX-FT530 Operating Instructions Manual

|
Making a Recording (continued)
Recording from deck I to deck 2
When PAUSE and {aisi@ejsis) of deck 2 are pressed, tape
recording starts by pressing the deck 1 playback button.
(Synchro-start function)
SELECTOR
I Ci) Set SELECTOR to TAPE/ 03.
co a Tt
a_} J
2 Sy Insert the playback tape into
deck 1 and the recording tape
into deck 2.
EDMINGB.P
3 Set EDITING to the desired posi-
albas tion.
"NORMAL":
"HIGH":
Normal speed
High speed
4 uas eG Press PAUSE of deck 2, then
{| |_| press RAOR.
5 <Piay Press PLAY of deck 1.
Recording is started by means of the
Synchro-start function.
To stop recording:
Press STOP/EJECT (deck 1 and deck 2).
Do not change the tape speed during recording. The play-
back sound may flutter.
Be sure to set SELECTOR to TAPE/ during record-
ing. Do not change it to any other position.
elf the unit is brought near a TV set during recording, noise
may be recorded due to the effects of the signals from the
TV set. Maintain a distance of at least 1.5 meters between
the unit and a TV set.
Erasure of tape
When recording, previously recorded signals on the tape
will be erased automatically.
(Make no connections to the /LINE IN jacks.)
1. Set SELECTOR to [CD] /LINE.
2. Press REAO).
10
Recording from external equipment
I Connect the output of the externa! equip-
ment to [CD] /LINE IN jacks. (Refer to page 5.)
Set SELECTOR to [CD] /LINE, and insert the
recording tape into deck 2.
Press PAUSE of deck 2, then press GESAR.
Start playing the external equipment (ex.
portable CD player).
Release PAUSE.
A RQ N