Advertisement
2
3
4
5
External controls
LED Indicator/
1
Power button
OSD functions
2
Exit
Blue Light Reducer
Menu
3
Down/Left
Audio Menu
4
Up/Right
Input select
5
Confirm
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful Interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by
turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other
relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with
EMC regulations.
Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/power saving mode.
a. Press to view the OSD.
b. When the OSD menu is active, this button will act as the exit key
(exit OSD menu).
a. Press this button to Blue Light Reducer Menu.
b. Press this button to select the desired item when in OSD menu.
a. Press this button to adjust the Audio Menu.
b. Press this button to select the desired item when in OSD menu.
a. Use the INPUT hotkey to enter Input select function.
b. When the OSD menu is displayed, press this button to confirm the
OSD selection.
1
Advertisement
