Download Print this page

Package Contents; Connect The Monitor To Your Computer - Acer PM1 Series User Manual

Advertisement

Acer LCD Monitor Quick Start Guide (QSG)
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.

Package contents

LCD monitor
Mini HDMI cable
*For best performance, please use the accessory cable to connect to the interface of this product.
The monitor
1. Remove the monitor bracket from the packaging and place it on a stable and level workspace.
2. Open or close the rear bracket. The viewing angle of the monitor can be adjusted using the stand.
(As shown below)

Connect the monitor to your computer

1. Connect the signal cable (Thunderbolt 3 (USB-C) cable) to
Type-C of the display, and Type-C output of the display card on
the computer.
2. When the monitor is connected to the computer, no external
power supply is required to the monitor. Just a single signal
transmission line (Thunderbolt 3 (USB-C) cable) It will be fine.
Connect your monitor.
Notes:
USB Type-C 5V / below 1.5A: You cannot adjust OSD.
USB Type-C 5V / 1.5A-3A: You can set the brightness value up to 60.
Type-C cable*
Cover
Quick start guide
LCD monitor PM1 Series-PM181Q
USER GUIDE

Advertisement

loading

This manual is also suitable for:

Pm181q