Messages Or Faults With The Twindos System - Miele WWB 680 Operating Instructions Manual

Table of Contents

Advertisement

Messages or faults with the TwinDos system

Problem
The Twin Dos
whites sensor control
flashes.
The TwinDos col-
ours sensor control
flashes.
The  indicator light
lights up and  appears
on the time display.
No detergent was dis-
pensed during washing.
A new detergent cart-
ridge has been inserted,
but the cartridge is iden-
tified as empty when the
machine is switched on.
Cause and remedy
The UltraPhase 1 cartridge is empty.
 Replace the UltraPhase 1 cartridge while the wash-
ing machine is switched on.
The UltraPhase 2 cartridge is empty.
 Replace the UltraPhase 2 cartridge while the
washing machine is switched on.
TwinDos has not been used for too long a time. It is
possible that detergent has dried inside the hoses.
 Immediately carry out the TwinDos maintenance
programme as described in the "Cleaning and
care" chapter, "TwinDos maintenance" section.
TwinDos was not activated.
 Touch the Twin Dos whites or TwinDos colours
sensor control before running the next programme.
TwinDos is activated.
The detergent was not dispensed even though the
Twin Dos whites or TwinDos colours sensor control
was activated.
 Start another programme with TwinDos dispens-
ing.
 If detergent is still not dispensed, call the Miele
Customer Service Department.
The washing machine was switched off when the de-
tergent cartridge was replaced.
 Switch on the washing machine.
 Remove the detergent cartridge and then reinsert
it into the compartment.
The counter is set to 0.
Problem solving guide
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wwb680 wcs 125 edition

Table of Contents