Volume
Finish tone
The volume can be changed for the
buzzer that sounds at the end of the
programme.
It can be set to one of 7 different set-
tings or switched off altogether.
Keypad tone
The volume of the tone that sounds
when a sensor is touched can also be
changed.
It can be set to one of 7 different set-
tings or switched off altogether.
Display brightness
The brightness of the display can be
altered.
It can be set to one of 7 different set-
tings.
Temperature unit
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit
(°F).
The factory setting is °C/Celsius.
"Display" off status
The display and the sensor control
lighting is switched off to save energy.
The Start/Stop sensor flashes slowly.
Options
-
Off
The lighting remains switched on.
-
(factory setting)
On
The lighting switches off after
10 minutes.
-
On. Not in current prog.
The lighting remains switched on
throughout the programme. The light-
ing switches off 10 minutes after the
programme has ended.
Settings
103