Table of Contents
Advertisement
Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regulariy ventilated room. Allowed
ambient temperature depends on the model (class) of the appliance
and is stated on the rating plate of the appliance.
Class
SN (sub-normal)
N (normal)
ST (sub-tropical)
T (tropical)
Never place the appliance near heat emitting devices (e.g. cooker,
radiator, water heater or similar devices) and do not expose it to direct
sunlight.
The appliance should be positioned at least 3 cm away from the
electric or gas cooker and at least 30 cm away from the oil or coal
stove. If this is not possible, use an appropriate insulation.
Behind the appliance there should be free space at least 200 cm
and above the appliance the high kitchen units should be at least 5 cm
away from the appliance in order to assure adequate ventilation of the
condenser unit.
Placing the Appliance
Place the appliance firmly on a solid
base. The appliance is equipped with
adjustable legs, used to level the
appliance. A key is enclosed for that
purpose.
Two spacers attached to the
appliance must be fitted onto the
upper edge of the condenser, thus
preventing the appliance from being
installed too close to the wall. Spacers
are manufactured for all-purpose
function depending on the distance of
the condenser from the wall.
Therefore turn spacers correspondingly and fix them to the
.
appliance
Instructions for Use
Ambient temparature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 18°C to + 38°C
from + 18°C to + 43°C
2
wide
67
Advertisement
Table of Contents
