Table of Contents
Advertisement
Arg ERROR
° Cause
e Improper use of argument
* Action
e Press G@) or (B) to display the location of the cause of
the error and make required corrections.
™ Order of Operations
Calculations are performed in the following order of prec-
edence.
( Coordinate transformation: Pol (x, y), Rec (r, 8)
@® Type A functions:
With these functions, the value is entered and then the
function key is pressed.
07 xe"
@ Powers and roots: x", "/_
® ale
(® Abbreviated multiplication format in front of x, memory
name, Or variable name: 27, 5A, 7A etc.
© Type B functions:
With these functions, the function key is pressed and
then the value is entered.
1, V7, log, In, e*, 10°, sin, cos, tan, sin~', cos™?,
tan~', sinh, cosh, tanh, sinh~', cosh7', tanh7', (—)
@ Abbreviated multiplication format in front of Type B
functions: 2 13, Alog2 etc.
@ Permutation and combination: nPr, nCr
@ x,+
i) ao as
* Operations of the same precedence are performed from
right to left. Inv" 120 > e{In(v 120)}
Other operations are performed from left to right.
* Operations enclosed in parentheses are performed first.
Mi Stacks
This calculator uses memory areas, called "stacks," to tem-
porarily store values (numeric stack) and commands (com-
mand stack) according to their precedence during calcu-
lations. The numeric stack has 10 levels and the command
stack has 24 levels. A stack error (Stk ERROR) occurs
whenever you try to perform a calculation that is so com-
plex that the capacity of a oa is exceeded.
e
e
Advertisement
Table of Contents
