Speci Cations - LG UT80 Series Owner's Manual

Product specifications may be changed without prior notice due to upgrade of product functions.
Only 86QNED8*
Except for 86QNED8*
(Depending on country)
Television system
External antenna impedance
• Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced
8K images will vary depending on the source content (Depending on model).
Operating Temperature
Operating Humidity
* This specification applies only to products with an adjustable wall mount angle.
• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on country)
- The Energy consumption is measured in accordance with IEC 62087.
- The recommended 'home viewing' picture mode is initial default picture mode.
• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.
• For information of the power supply and power consumption, refer to the label attached to the product. (Depending on country)
- The typical power consumption is measured in accordance with IEC 62087 or each country's energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending on the model or country, the typical power consumption may not be on label.

Speci cations

Broadcasting Specifications
Environment Condition
0 °C to 40 °C
Less than 80 %
Conditions for Wall Mount Installation
Tilt Angle
Power requirement
AC 200-240 V~ 50/60 Hz
AC 100-240 V~ 50/60 Hz
Terrestrial / Cable / Satellites Digital TV
75 Ω
Storage Temperature
Storage Humidity
-20 °C to 60 °C
Less than 85 %
0° - 15°
7