KeeNetic TITAN Quick Start Manual

KEENETIC
TITAN
Quick Start Guide
AX3200 Mesh Wi-Fi 6 Multi-Gigabit Router with Dual Core
ARM CPU, Dedicated Real-Time Wi-Fi Spectrum Analyzer,
a 5-Port Gigabit and 1-Port 2.5 Gigabit Smart Switch,
USB 2.0 and USB 3.0 Ports
Model: KN-1811
2
1
0 1 2 3 4 5
3
10:00
Welcome to
Your Keenetic
4
Next
5
Installing Your Keenetic Titan
1. Position your Keenetic Titan (hereinafter 'Keenetic device') within cable
lengths of Ethernet and power outlets. Place your Keenetic device
in an unenclosed space for better wireless coverage.
2. Connect your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
3. Сonnect a mobile device to your Keenetic device via Wi-Fi. The default
Wi-Fi name (SSID) and the Wi-Fi password are printed on your Keenetic
device's back label along with a QR code that will automatically connect
your mobile device to the Keenetic device's Wi-Fi when scanned.
Alternatively, сonnect a computer to any gray Ethernet port on your
Keenetic device using the included Ethernet cable.
4. Once connected, an Initial Setup Wizard window will appear on your
mobile device / computer. If the Wizard does not appear, using a browser
go to my.keenetic.net.
Note: If the Initial Setup Wizard doesn't appear, please refer to the
Frequently Asked Questions section below.
5. In the Initial Setup Wizard window that appeared, select the
configuration option.
To create a new network and connect it to the Internet, choose the
appropriate connection type and follow the setup instructions.
To extend an existing network and add this Keenetic device
as a Wi-Fi extender, choose the To switch to Wi-Fi Extender Mode
option and follow the setup instructions.
For technical support and other information, please visit
help.keenetic.com