Subscribe to Our Youtube Channel
Related Manuals for Westermann Project table A-Plus
Summary of Contents for Westermann Project table A-Plus
- Page 1 Operation Manual Project table A-Plus Pneumatically operated Version 02 – 2020.11 1/11...
-
Page 2: Table Of Contents
Changes to the table frame or improper use can affect the safety, function and service life! These operating instructions are intended for the sit-stand tables of the motu furniture series A-Plus conference table with electrical height adjustment. Due to different designs / types, images may differ. Karl Westermann GmbH + Co. KG _______________________________________________________________________________________ Content INTENDE USE .................. -
Page 3: Intende Use
INTENDED USE Modifications to the table frames are not permitted. This sit-stand table must be assembled, commissioned and functionally checked by competent personnel. The use of this sit-stand table for any purpose other than the aforementioned, e.g. as a lifting platform, seating, etc., is not permitted. TARGET GROUP AND PRIOR KNOWLAGE The following knowledge is required for commissioning the sit-stand tables: •... -
Page 4: General Savety Instructions
Danger: Cleaning and user maintenance must not be carried out by children without supervision. Attention: Only use original accessories from Karl Westermann GmbH + Co. KG. The use of parts and components from third parties is prohibited! The use of unsuitable accessories may result in damage to or destruction of the table frame. -
Page 5: Set Up And Furnish
Attention: If the product is visibly damaged, makes unusual noises or causes an odour to develop, it must not be further assembled or used! Attention: never place the table on one side and never let it fall. Damage to the frame and lifting column may occur. -
Page 6: Important Service Note
• One-sided loads on the tabletop must be avoided. • If the project table A-Plus is not rolled, all 4 castors must always be locked via the locking lever on the castor. IMPORTANT SERVICE NOTE Danger: Only use original accessories! These may only be fitted by expert service personnel! Otherwise you will lose your warranty and guarantee claims. -
Page 7: Repairs
REPAIRS In the event of a technical defect on this unit, please contact one of our authorised service personnel. Caution: To avoid malfunctions, all repairs must be carried out by authorised service personnel only. Caution: If components of this table frame are opened, there is a risk of malfunction. The gas springs used are permanently under pressure and must never be opened. - Page 8 or soft cloth. If soiling cannot be removed with this, use mild, commercially available cleaning agents that have no abrasive ingredients. Depending on the degree of soiling, it is advisable to let the cleaning agent soak in. Then rinse with water and dry. Remove all residues of the cleaning agent to prevent streaks from developing.
-
Page 9: Assembly
ASSEMBLY We usually deliver the project table A-Plus assembled. If assembly is necessary, then only the assembly of the tabletop onto the table frame. 1) Assembly of the table top Fasten the table top to the table frame using the fastening material supplied (screws in a labelled bag). -
Page 10: Operation
OPERATION Adjust desk height The height adjustment is operated by means of the release lever mounted under the table top. Make sure that there are no objects or persons in the entire lifting range. Ensure that all connecting cables of devices on the desk are of sufficient length. Make sure that there is only the maximum payload of 25kg on the desk. -
Page 11: Contact
CONTACT Version 02 – 2020.11 11/11...
Need help?
Do you have a question about the Project table A-Plus and is the answer not in the manual?
Questions and answers