Table of Contents
Advertisement
Available languages
Available languages
Model DHR263
Vibration
Work mode
emission
Hammer
drilling into
17.6 m/s
concrete
(a
)
h, HD
Chiselling
14.3 m/s
(a
)
h, CHeq
Model DHR264
Vibration
Work mode
emission
Hammer
drilling into
16.5 m/s
concrete
(a
)
h, HD
Chiselling
14.5 m/s
(a
)
h, CHeq
NOTE:
• The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
• The declared vibration total value(s) may also be used
in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Declarations of Conformity
For European countries only
The Declarations of conformity are included in Annex A
to this instruction manual.
12
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
1.8 m/s
EN 62841-2-6
2
2
1.5 m/s
EN 62841-2-6
Applicable
Uncertainty
standard /
(K)
Test
condition
2
2
2.0 m/s
EN 62841-2-6
2
2
1.5 m/s
EN 62841-2-6
ENG901-2
Advertisement
Table of Contents
