Advertisement
Perform a meaurement
•
Turn the device on by pressing "On/Off/Esc".
Put the probe(s) to the required location.
The device displays the temperature measurement.
If the thermometer used is the TR62 with two connected probes, the device will display the two measurements.
•
Press "OK" to display the delta T between the two measured temperatures.
Hold the measurement, display the maximum and minimum
During a measurement:
•
Press "Hold/min/max".
"Hold" is displayed and the measurement is frozen.
•
Press again "Hold/min/max".
The device displays the maximum value measured since the last questioning of the frozen channel at the top of the
screen and the minimum value measured since the last questioning of the frozen channel at the bottom of the screen.
•
For a TR 62 with two connected probes:
The device displays the maximum value of the C1 probe measured since the last questioning of the frozen channel at
the top of the screen and the minimum value of the C1 probe measured since the last questioning of the frozen channel
at the bottom of the screen.
•
Press again "Hold/min/max".
The device displays the maximum value of the C2 probe measured since the last questioning of the frozen channel at
the top of the screen and the minimum value of the C2 probe measured since the last questioning of the frozen channel
at the bottom of the screen.
•
Press again Hold/min/max.
The device displays the maximum value of the delta T since the last questioning of the frozen channel at the top of the
screen and the minimum value of the delta T since the last questioning of the frozen channel at the bottom of the screen.
•
Press "On/Off/Esc" to return to the measurement display.
Set the device
Select the temperature unit
The device is on and displays the measurement.
•
Press "Selection" until "UNIT" blinks on screen. Press "OK".
The unit currently used blinks on screen.
•
Press "Selection" until the required unit appears: °C or °F.
•
Press "OK" to con rm the unit selection.
"UNIT" blinks on screen.
•
Press "On/Off/Esc" to return to the measurement display.
Set the auto shut-off
The device is on and displays the measurement.
•
Press "Selection" until "AUTO OFF" blinks on screen. Press "OK".
The time before the device auto shut-off blinks at the bottom of the screen.
•
Press "Selection" until the required time before the device auto shut-off appears: 15, 30, 45, 60, 75, 90, 105, 120
minutes or OFF.
•
Press "OK" to con rm the selection.
"AUTO OFF" blinks on screen.
•
Press "On/Off/Esc" to return to the measurement display.
Activate or deactivate the keys beep
The device is on and displays the measurement.
•
Press "Selection" until "BEEP" blinks on screen. Press "OK".
"OFF" or "ON" blinks on screen.
•
Press "Selection" to activate the keys beep "ON" or deactivate it "OFF".
•
Press "OK" to con rm the selection.
"BEEP" blinks on screen.
•
Press "On/Off/Esc" to return to the measurement display.
Advertisement
