Kodak Easy Share DX6490 User Manual page 106

Problem
Picture is too
light.
In Review mode,
multi-up video
display, a blue
screen is
displayed instead
of a picture.
Stored pictures
are damaged.
94
Chapter 10
Cause
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
Too much light.
Auto exposure was not
achieved.
The camera is
processing a picture.
The card was removed
or the battery expired
while the mode light or
the image storage icon
was blinking.
Solution
(page 26).
Move so there is at least 2.0 ft (0.6
m) in Wide; 3.9 ft (1.0 m) in Tele
between camera and subject.
Reposition the camera or subject
to decrease available light.
Use PASM mode to adjust the
aperture or shutter speed
(page 19).
To take the best possible pictures,
press the Shutter button
half-way and hold. When the
AF/AE indicator turns green, press
the Shutter button the rest of the
way down to take the picture.
The camera is operating normally.
When processing ends, the first
frame of the video is displayed on
the multi-up screen.
Retake picture. Turn off the
camera before removing the card.
Keep battery charged.