Description Of The Controls - Smeg CSE66I3 Instruction Manual

3. Description of the controls

3.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
2
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2
Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
PROGRAM SELECTION BUTTON
By pressing this button in sequence it is possible to select the desired
3
program.
RINSE AID WARNING LIGHT
4
Illumination of this light signals that rinse aid dispenser is empty.
EXTRA PROGRAM BUTTON
5
This button gives access to the one of the five extra programs (see table).
EXTRA PROGRAM LIGHT
6
Illuminates to indicate that one of the five extra programs (see table) is
going to be executed.
HALF LOAD BUTTON
7
Press this button to activate the half load wash option.
HALF LOAD LIGHT
8
Illumination of the light indicates selection of the HALF-LOAD function.
PROGRAM DELAY BUTTON
9
Press this button to delay the start of the program by up to 9 hours.
10 INFORMATION DISPLAY
10
User instructions
3 4 8 7 6 5 10 9 1