Wildix FORCEPRO 5 User Brochure

FORCEPRO 5 END USER BROCHURE - ENGLISH
PACKING LIST
• 1 x ForcePro phone
• 1 x handset
• 1 x handset cord
• 1 x stand
• 1 x Ethernet cable
SAFETY INFORMATION
https://www.wildix.com/safety-information/
MOUNTING INSTRUCTIONS
Attach the stand to the phone (desk mounting); for wall
mounting, use wall mount bracket (article can be purchased
separately, WMP code: WallMount24 (will be available for order
soon)).
CONNECTION
The ports are situated on the rear panel of the phone
Connect the handset to the port using the handset
•
cord
Connect the phone to the network PoE switch
•
using RJ-45 cable
(Optional) Connect the port to the PC using
•
RJ-45 cable
(Optional, this is a PoE device) Connect the phone
•
to the power supply (power adapter can be
purchased separately, WMP code: PS-5V2A)
(Optional, 2 ports) Connect the USB headset
•
(headsets can be purchased separately, WMP
codes: MonoLED, DuoLED)
PHONE OVERVIEW
Version 03/2024
LOGIN
1. Lift the receiver and dial 99
2. Enter your extension number
3. Enter the first five characters of your password
4. Press 1 when prompted
To enter your password from the phone's keypad: press once
an alphanumeric key corresponding to a letter which you need
to enter; press the star button (*) to enter any special character.
Example: Password: 4Ag7$Zl@
Enter: 4247*
BLF / FUNCTION KEYS
Function keys must be set up in Collaboration Settings -> Fn
keys / x-bees -> Favorites, or by the PBX administrator.
This phone supports up to 45 Function keys. Use Navigation
keys to move between pages.
CALL FEATURES
Press Feature Soft key from idle to set the following call
features for each call type (Internal, External, Blacklist,
Whitelist), based on user status (Available, DND, Away): Call
reject, Call forwarding, Call Waiting, Mobility, Ring Tone.
Features can be also set up in Collaboration / x-bees / WMS /
iOS/Android / x-bees app.
Page 1 of 2