Wildix START 5 User Brochure

START 5 END USER BROCHURE - ENGLISH
PACKING LIST
• 1 x Start
• 1 x handset
• 1 x handset cord
• 1 x stand
• 1 x Ethernet cable
SAFETY INFORMATION
https://www.wildix.com/safety-information/
MOUNTING INSTRUCTIONS
Attach the stand to the phone (desk mounting) or hang the
phone on the wall (without attaching the stand).
CONNECTION
The ports are situated on the rear panel of the phone
Connect the handset to the port using the handset
•
cord
Connect the phone to the network PoE switch using
•
RJ-45 cable
(Optional) Connect the port to the PC using
•
RJ-45 cable
(Optional, this is a PoE device) Connect the phone
•
to the power supply (power adapter can be
purchased separately, WMP code: PS-5V2A)
(Optional) Connect the headset to the port (headsets
•
can be purchased separately)
PHONE OVERVIEW
Version 03/2024
LOGIN
1. Lift the receiver and dial 99
2. Enter your extension number
3. Enter the first five characters of your password
4. Press 1 when prompted
To enter your password from the phone's keypad: press once
an alphanumeric key corresponding to a letter which you need
to enter; press the star button (*) to enter any special character.
Example: Password: 4Ag7$Zl@
Enter: 4247*
BLF / FUNCTION KEYS
Function keys must be set up in Collaboration Settings -> Fn
keys / x-bees -> Favorites, or by the PBX administrator.
This phone supports up to 4 Function keys distributed over 2
pages. Use Navigation keys to move between pages.
CALL FEATURES
Press Feature Soft key from the standby mode to set the
following call features for each call type (Internal, External,
Blacklist, Whitelist), based on user status (Available, DND,
Away): Call reject, Call forwarding, Call Waiting, Mobility, Ring
Tone.
Features can be also set up in Collaboration / x-bees / WMS /
iOS/Android / x-bees app.
Page 1 of 2