Advertisement
• This appliance is manufactured and tested in accordance with valid
regulations.
Do not store explosive substances such as aerosol cans with a
•
flammable propellant in this appliance.
Installation
• Obey the installation instruction supplied with the appliance.
• Remove all the Packaging items.
• Do not install or use a damaged appliance.
• Before first time starting
during transport.
• Never remove or damage stickers, warning labels or nameplates attached to
the appliance.
Electrical connection
• Only plug the water dispenser directly in the
current if it is correctly grounded and with the
certain voltage.
• Choose a place that is near a grounded
electrical outlet.
• Make sure the appliance is installed correctly.
Loose and incorrect electricity mains cable or
plug (if applicable) can make the terminal
become too hot.
• Make sure that the electrical information on
the rating plate agrees with the power supply.
If not, contact our Authorised Service Centre
or an electrician.
• The appliance have electrical switchs in the
rear side which is set to turn ON or OFF the
water heating and cooling system.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the
mains cable. Contact our Authorised Service Centre or an electrician to
change a damaged mains cable.
Water connection
• Make sure to use a new water bottle.
• Make sure the water bottle not faulty - no leakage or holes.
• Make sure to install the bottle as in Catalogue.
• Make sure to use the proper capacity
up, check the appliance for any damage incurred
litre for the water bottle.
Advertisement
