GE JBS360DMBB Owner's Manual page 27

Troubleshooting Tips ... Before you call for service
Problem Possible Cause
Food does not bake Oven controls improperly set.
properly
Rack position is incorrect or rack is not level.
Incorrect cookware or cookware of improper
size being used.
Oven temperature needs adjustment.
Ingredient substitution
Food does not broil Oven controls improperly set.
properly
Improper rack position being used.
Food being cooked in a hot pan.
Cookware not suited for broiling.
Aluminum foil used on the broiling pan and
grid has not been fitted properly and slit as
recommended.
Oven temperature too Oven temperature needs adjustment.
hot or too cold
Oven does not work A fuse in your home may be blown or the
or appears not to work circuit breaker tripped.
Oven controls improperly set.
"Crackling" or This is the sound of the metal heating and
"popping" sound cooling during both the cooking and cleaning
functions.
Why is my range Your range cycles the heating elements by
making a "clicking" turning relays on and off to maintain the oven
noise when using my temperature.
oven?
Clock and timer do A fuse in your home may be blown or the
not work circuit breaker tripped.
Plug on range is not completely inserted in the
electrical outlet.
Oven controls improperly set.
Storage drawer won't Power cord may be obstructing drawer in the
close lower back of the range.
Rear drawer support is on top of the guide rail.
Oven door is crooked The door is out of position.
49-88075 Rev. 3
What To Do
See the Cooking Modes section.
See the Cooking Modes section and Cooking Guide.
See the Cookware section.
See the Special Features section.
Substituting ingredients can change the recipe
outcome.
Make sure you select the appropriate broil mode.
See Cooking Guide for rack location suggestions.
Make sure cookware is cool.
If using aluminum foil conform to pan slits.
Preheat the broil element for 10 minutes.
See the Special Features section or adjust the
Replace the fuse or reset the circuit breaker.
Press Bake and Broil pads at the same time and
hold for three seconds. "SF" will appear in the
display. Press the Set Clock pad or the Cook Time
pad until "On" appears in the display and then press
Start. The display will change from a single bracket
This is normal.
This is normal.
Replace the fuse or reset the circuit breaker.
Make sure electrical plug is plugged into a live,
properly grounded outlet.
Reposition the drawer and power cord. See the
and cleaning of the range section.
Removal instructions in the Care and cleaning of the
range section.
Because the oven door is removable, it sometimes
gets out of position during installation. To straighten
the door, push down on the high corner.
27