Installation - Coleman Power Steel 90481E Owner's Manual

SETUP INSTRUCTIONS
CHOOSE THE CORRECT LOCATION
The surface chosen to install the pool on must respect the following conditions:
• Because of the combined weight of the water inside the pool and the pool users, it is extremely important that the surface chosen to install the
pool on is capable of uniformly supporting the total weight for the entire time the pool is installed. When choosing the surface, take into
consideration that water may come out of the pool when in use or when it rains. If the water softens the surface, it may lose its capability to
support the pool weight.
• Check the position of the vertical legs and/or the U-supports regularly. They must be on the same level as the bottom of the pool at all times. If the
vertical leg or the U-support starts to sink into the ground, drain the pool water immediately to avoid the pool collapsing due to the uneven loading
on the frame structure. Change the location of the pool or modify the surface material.
• The surface must be flat and smooth. If the surface is inclined or uneven, it can create an unbalanced loading on the structure of the pool. This
can damage the welding points of the liner and bend the frame. In the worst cases, the pool can collapse, causing serious personal injury and/or
damage to personal property.
• We recommend positioning the pool away from any objects children could use to climb into the pool.
• Position the pool near an adequate drainage system to deal with overflow or to empty the pool. Ensure the pool side with the water inlet A and
outlet B is located in the same direction of the power source, where the filtration system has to be connected.
• The selected surface must be clear of any type of object. Due to the weight of the water, any object under the pool could damage or perforate the
bottom of the pool.
• The selected surface must be clear of aggressive plants and weed species. Those types of strong vegetation could grow through the liner and
create water leakage. Grass or other vegetation that may cause odor or slime to develop have to be eliminated from the set-up location.
• The selected location must not have overhead power lines or trees. Be sure the location does not contain underground utility pipes, lines or
cables of any kind.
• The selected position must be far from house entrance. Do not position any equipment or other furniture around the pool. The water that comes
out of the pool during use or due to product faults can damage furniture inside the house or surrounding the pool.
• The selected surface must be flat and without holes that can damage the material of the liner.
• Keep at least 1.5 meters around the pool free of walls, fences or other structures to avoid damaging to the pool during use.
Suggested set-up surfaces: grass, ground, concrete, and all other surfaces that respect the above set-up conditions.
Surfaces to avoid: mud, sand, gravel, deck, balcony, driveway, platform, soft/loose soil or other surface that does not meet the above set-up
conditions.
• Check with your local city council for by-laws relating to fencing, barriers, lighting and safety requirements and ensure you comply with all laws.
• If a pump and/or ladder is included in the set, refer to the pump's and/or ladder's manual for safety instructions and installation. The ladder must
match the pool size.
• If during set up it is necessary to change the position of the pool, lift up the liner and do not drag it on the ground; the friction between the PVC
material and the ground can damage the pool liner.
• Follow the important instructions above to choose the correct surface and location to set up your pool. Damaged parts of the pool, due
to the fact that the set-up surface and location does not match the instructions, will not be considered as manufacture defect and will
avoid the warranty and any service claims.
Assembly Instructions
For installation instructions, scan the QR Code printed on the front cover or follow the illustrations below. Drawings are for illustration purposes
only. May not reflect actual product. Not to scale. Assembly of this pool can be completed without additional tools. Bestway is not responsible for
damage caused to the pool due to mishandling or failure to follow these instructions.
Helpful Installation Tips:
We strongly suggest opening the package and assembling the pool when the ambient temperature is above 59ºF / 15ºC. The PVC material of
the liner will be more flexible and easier to assemble in this environment. To expedite the assembly process, we suggest setting the pool up
with the help of 2-3 people.
We suggest you buy a pool ladder (if one is not included in the set) and prepare it before setting up the pool, as it will help whenever you
need to get inside it.
Filling the Pool with Water:
ATTENTION: Do not leave the pool unattended while filling with water. Check the pool situation by time during this operation. Be sure that the
position of the vertical legs is not under the liner and is 90 degrees to the surface and the support sleeves on the bottom of the liner are fully extended.
It is highly recommended to use tap water for filling to minimize unwanted content, such as minerals. Do not use sea water. Fill the pool with water
after all assembly steps are completed and until the water reaches the welding line, which corresponds to 90% of the full capacity. Do not overfill as
this could cause the pool to collapse. In the case of heavy rainfall, we strongly recommend reducing the water level to keep it at 90% capacity and
avoid the overflow of water.
IMPORTANT: When the pool is 90% full, check that the distance between the water surface and the top of the rails is the same all around. If it is
different, it means that the surface is not level, and we strongly recommend draining the water and adjusting the chosen location. Never attempt
to move the pool with water still in it.
IMPORTANT: Keeping the pool full of water on unlevel ground can cause the bursting of welding points and/or pool collapse, causing serious
personal injury and/or damage to property. Your pool may contain a great deal of pressure. If your pool has a bulge or uneven side, the sides
may burst, suddenly releasing water and causing serious personal injury and/or damage to property. When the pool is 90% full, check the pool
for any leaks at the valves or seams and for any evident water loss. Do not add any chemicals to the water until this has been done.

INSTALLATION

1
C
2
D
C
C
C
D
A
6