Table of Contents
Advertisement
Warning
Only use the PSU supplied in the original packaging.
Notes
If the product is not working properly, please contact the dealer or the
nearest service centre, and do not disassemble or modify the product in
any way. (We will not take any responsibility for the problems caused by
unconfirmed modification or maintenance).
Please avoid installing the product in a vibration or shock environment
and keep the product away from electromagnetic interference.
Do not install the product outdoors.
Do not install the product where it may come into contact with water
or corrosive products.
Avoid placing the product in direct sunlight.
Operate the camera within the environmental limits set out in this QSG.
Avoid pointing the lens directly into strong light as this may damage
the camera.
Ensure there is good ventilation around the camera.
Ensure you keep your password private and secure at all times.
Please contact us in if you suspect that the product may have been
compromised on your network.
Advertisement
Table of Contents
