KeeNetic SPRINTER Quick Start Manual

KEENETIC
SPRINTER
Quick Start Guide
AX1800 Mesh Wi-Fi 6 Gigabit Router/Extender
with a 4-Port Gigabit Smart Switch
Model: KN-3710
Creating a New or Extending
an Existing Network
Keenetic routers deliver reliable, continuous, and secure Wi-Fi
throughout your home. Starting with one main Keenetic router,
as your demands increase, you can add more Keenetic devices
to act as Wi-Fi extenders to create a centrally-managed multi-node
Mesh Wi-Fi System.
If you are creating a new network and this Keenetic Sprinter
(hereinafter 'Keenetic device') is going to be your Main Router,
use the switch position A H.
If you are extending an existing network and this Keenetic device
is to act as a Wi-Fi extender, turn the switch to position I B.
B
2
3 2 1 0
A
2
3
10:00
1
3
6
A H — Connecting Your Keenetic Sprinter
to the Internet
1. Set the physical Operating Mode Switch located on the side panel to position
А H — Router Mode.
2. Position your Keenetic device within cable lengths of Ethernet and power
outlets. Place your Keenetic device in an unenclosed space for better wireless
coverage. Connect your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
1
3. Сonnect a mobile device to your Keenetic device via Wi-Fi. The default Wi-Fi name
(SSID) and the Wi-Fi password are printed on your Keenetic device's back label
along with a QR code that will automatically connect your mobile device to the
Keenetic device's Wi-Fi when scanned. Alternatively, сonnect a computer to any
of the gray Ethernet ports on your Keenetic device using the included Ethernet
2 1 0
cable.
4. Once connected, an Initial Setup Wizard window will appear on your
mobile device / computer. If the Wizard does not appear, using a browser
go to my.keenetic.net and follow the setup instructions.
Note: If the Initial Setup Wizard still doesn't appear, please refer
to the Frequently Asked Questions section below.
3
I B — Extending Your Existing Network Coverage
1. On the Keenetic device you wish to be a Mesh Wi-Fi Extender, set the Operating
Welcome to
Mode Switch located on the side panel to position I B — Extender Mode.
Your Keenetic
2. Connect your Keenetic device to a power source. Check that both the
Status LED C and Wi-Fi LED D are illuminated and not blinking.
4
Next
3. Make sure your Keenetic Main Router is active and has an Internet connection.
Connect the 'Extender' Keenetic device to your Keenetic Main Router using
an Ethernet cable (as supplied). Alternatively you can connect Keenetic
devices wirelessly by placing them near to each other and simultaneously
pressing the Wi-Fi Control Buttons D on both devices. Check that the
Internet LED A on the 'Extender' is illuminated.
4. Сonnect a mobile device / computer to your Keenetic Main Router network.
5. Launch a web browser and go to my.keenetic.net and log in to the Main Router
or launch the Keenetic Mobile Application. Then choose the Wi-Fi System section
and click Acquire to add an extender candidate to your Wi-Fi System. Wait for the
process to complete.
6. Disconnect the acquired Extender from the Main Router and place the Extender
where you want to expand your Wi-Fi network in your home. A Keenetic Mesh
Wi-Fi System supports both wireless and wired connections between the Main
Router and Extenders. To maximize your network performance, use wired
connections where possible. The Internet LED A on the Extender will
illuminate when it has connected successfully to your network.
4
10:00
Mesh Wi-Fi
System
5
Acquire
For technical support and other information, please visit
help.keenetic.com