Advertisement
WA-8000/8200
To check the date and second digits you have just set
When
the current
time
is displayed
normally,
press the SET
button.
:
The date digits will appear while you press the SET button and
disappear
when
you
release
it. Press
the SET
button
again
immediately and the second digits will appear. To make the. cur-
rent time reappear, press the SET button.
3
Press the SELECT button and the SET button to adjust the miute
digits of the alarrn time to "15".
|
ar
eLLe
:
ALARM
~The minute digits will blink.
To change the time display system
The time display system is preset to the 12-hour system at the
factory but can be changed to the 24-hour system by pressing
the SELECT and SET buttons at the same time.
TU
While the current time is displayed, press the
al al I
SELECT and SET buttons at the same time.
TU ein
The letter PM will disappear and the current
sd
time will be displayed in the 24-hour format.
Notes
@ When
changing the time display system, make sure that the.
current time is displayed normally. If you do while the digits are
blinking, you can not change the time display system.
@ To revert to the 12-hour display system, press the SELECT
button and SET buttons at the same time again.
5
HOW TO SET THE ALARM
The alarm preset system automatically turns the alarm on at same
time each day.
Example: To set the alarm to AM 7:15
The alarm will sound by beeper or beeper and radio, depending on
your choice.
2
When
the current
time
is displayed,
press
the MODE
button
once and the SET button to adjust the hour digits of the alarm
time to "7".
AM 40
ALARM]
"ALARM" and the blinking hour digits of
MODE
the alarm time will be displayed.
ae
ce
SUG
AM AHEM
ALARM
SET
OO) tl
0
The © indication will be displayed.
fe z i)
AM THA
ALARM
SET
OO |b)
Q
4
Set to RADIO/ALARM
STANDBY
switch to-ON. The radio sound
will not be heard and the alarm has been set.
ON
{F RADIO/ALARM STANDBY
OFF
After you have set the alarm or you have checked the alarm time,
press
the MODE
button
twice to make
the current
time display
appear.
To check that the alarm has been set
Press the MODE button once. The alarm time will be displayed with
the © indication.
Notes
@ If you want the alarm to be sounded without the radio, set the
function selector to apie OFF):
@ If you want to stop the beeper when the alarm is sounded with
both the radio and the beeper, set the RADIO/ALARM
STANDBY
switch to OFF.
,
@ The VOLUME
control does not affect the beeper.
To check the time at which the alarm is set to go off
When
the current
time is displayed
normally,
press the SELECT
button. The alarm time will appear with. the © indication while you
press the SELECT button and disappear when you release it. If the
©® indication is not displayed, the alarm will not go off.
To cancel the alarm
When
the current-time
is displayed,
while pressing
the SELECT
button, press the SET button, then release them. The © indication
will disappear and the alarm will be cancelled.
(E20)
SELECT SET
Of
The © indication will disappear.
To set the alarm again, do the same thing again. The © indication
will appear to indicate that the alarm has been set again.
Advertisement
