Attaching The Drum Set; Initialization; Setting Samples And Preset Memories - Boss Dr.Beat DB-88 Owner's Manual

Attaching the Drum Set Initialization
Using the optional MDY-7 Cymbal Holder Set, до (Restoring the data preprogrammed at
as follows: the factory)
Follow these instructions:
1. Switch off the unit.
2. Switch on the unit while you have both the
Metronome Mode and Loop Mode buttons
held down.
3. When the display responds as follows,
press the Write button. All data will be
initialized, then the unit will go into the
same state as it normally does when it is
switched on.
PROGRAM BEAT COUNT
| 1
2 |!
roe
]- 4
TEMPO
/ LOOP x ЛИЗА
* If you wish to cancel the initialization, switch off the
unit.
to кә
Setting Samples and Preset Memories
Program 1: 4 Beat Program 2: 3 Beat Program 3: 3 + 2 Beat
(5 Beat)
}
(4 гл
PROGRAM BEAT COUNT PROGRAM BEAT COUNT
OL tor 1 Bis D. 7 2 T Bi ES 10 T 7 2 1 BH
| П jMETRO1 | Ч П prem 23 ! ETRO 33 Jg |
TEMPO TEMPO
TEMP mm / LOOP X ЛИЯ / LOOP x А9
ACCENT 1 2 ad 0 ACCENT і 2 А й