Factory Data Reset; Networking Settings - Lenovo smart lock X3 User Manual

3 : FACTORY DATA RESET

1. Add Users
2. Delete User
3. System Settings
4. Record/Language/Voice
a. Press [*] to cancel the operation, and press [#] to restore factory
Settings.
b. Press the [#] key. The message "Clearing succeeded" is displayed.
The system restarts.
CAUTION
After the factory Settings are restored, all user data will be cleared. Exercise caution when perform-
ing this operation.

4 : NETWORKING SETTINGS

1. Add Users
2. Delete User
3. System Settings
4. Record/Language/Voice
a. The message "Networking configuration, please wait" is displayed.
b. Connect your mobile phone to WIFI, open the "Smart Lenovo" APP, click the "+" button in the
upper right corner, select "security", select "Lenovo Smart Door Lock X3", and then follow the
instructions to add.
5 : TWO-FACTOR AUTHENTICATION SETTING
1. Add Users
2. Delete User
3. System Settings
4. Record/Language
/Voice
a. Press 1 to disable two-factor authentication.
b. Press 2 to enable two-factor authentication.
CAUTION
To enable Two-factor authentication, at least two common users must exist in the system.
The system supports two-factor authentication only for common users. Administrative users and
temporary users do not need two-factor authentication.
1. Time Setting
2. Installation Settings
3
3. Function Setting
4. Restore Factory Settings
1. Time Setting
2. Installation Settings
3
3. Function Setting
4. Restore Factory Settings
1. Time Setting
2. Installation Settings
3
3. Function Setting
4. Restore Factory
Settings
4
3
1. Networking
Settings
3
2. Set Two-factor
Authentication
Factory Data Reset
No [*] / Yes [#]
Press This Key
to Restore Factory
Defaults
1. Networking Settings
2. Set Two-factor
Authentication
1. Disable Double
Check FFL
2
2. Enable Dual
Authentication