Table of Contents
Advertisement
1 : ADMIN SETTINGS
1.1 : ADD ADMINISTRATOR PASSWORD
a.
Shortly press [*] key, and then press [#] key. After hearing the voice prompt "Add administrator,
please input 6~8 digits password", user shall input 6-8 digits password, and then press [#] key to
confirm.
b.
After hearing the voice prompts "Please input the same password again", then enter the same
password.
c.
After hearing the voice prompts "Add successfully", the system automatically jumps to the main
menu, the user can exit or perform other operations according to the voice instruction.
1.2 : ENTER THE MAIN MENU
Light up the touch screen and press [*] and then press the [#] key to enter the main menu or press
the SET key of the rear lock panel in two ways. To enter the main menu, the user must enter the
administrator information to verify.
After entering the main menu, the user will hear the voice prompts "Please press the number key to
select the operation", and the user can press the corresponding number key to select the operation
according to the menu number.
1. Add Administrative
Users
1
2. Add Common Users
1. Verify The Deletion
User
2
1. Add Users
2. Delete User by Number
2. Delete User
3. System
Settings
4. Record/
Language
1. Time Setting
/Voice
2. Installation Settings
3
3. Function Setting
4. Restore Factory Settings
1. Check the Number
of Users
2. Read Unlocking Record
4
3. Language Setting
4. Voice Setting
CAUTION
During the above operation, you can follow the voice prompts.
Please enter the
1
Fingerprint, Password,
RFID Card to be added
2
1. Door Opening
Direction (Left)
2. Auto Lock (Off)
2
3. Door Lock Setting
4. Alarm for Stay (Off)
1. Networking
Configuration
3
2. Dual Authentication
Setting
1. Delay Locking Time:
2
Off;10s;20s;30s;60s;120s
1. Anti-pry Alarm (Off)
2. Torque Setting (Medium)
3
3. Back Lock Time (3s)
Advertisement
Table of Contents
