Advertisement
Available languages
Available languages
Figure 2
As shown in Figure 3, insert the two pieced L-shaped steps into the side plate and tighten
the nuts. lf the two steps cannot be inserted, please check the Angle formed by the baffle
and the chair face. It may be necessary to insert them in the opposite direction.
As shown in figure 4, insert the sketchpad into the side plate (note that if you want to use
the dining table function, turn the dining table up, otherwise, the sketchpad up) and
tighten the nuts.
As shown in Figure 2, after carefully removing
the protective layer of the drawing board sticker,
paste the drawing board sticker on the dining
table to form a dual-use board for using.
Figure 3
Figure 4
02
03
04
Advertisement
