Table of Contents
Advertisement
Wrinkle Care
This option adds steam after the spin to reduce
wrinkles.
1
Turn on the power.
2
Select the desired cycle.
3
Press and hold the Steam button for 3
seconds to select this function.
4
Press the Start/Pause or Power button at any
time to unload laundry.
Using the Pre-wash Option
This option adds a pre-wash (for about 15 - 17
minutes) for improved cleaning of heavily soiled
or stained clothing.
• Press and hold the TurboWash
buttons at the same time for 3 seconds.
- The indicator (
I
) lights up.
Remote Start
Use a smartphone to control your washer
remotely.
• For more information, see SMART FUNCTIONS
in this manual.
Delay Wash
Once you have selected the cycle and other
settings, press the Delay Wash button to delay the
start of the wash cycle.
• Each press of this button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Wi-Fi
When the washer is connected to a home Wi-Fi
network, the
• To connect the washer to the LG ThinQ
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press and hold the TurboWash
TurboWash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without TurboWash
TM
and Dry
Heavy Soil
Select this option to wash heavily soiled laundry
with more power than the standard cycle.
• Press the Heavy Soil button to select the option.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
• When the controls are locked,
• Turning off the power will not reset this function.
Locking/Unlocking the Control Panel
1
icon on the control panel is lit.
f
application, press and hold the Delay Wash
button for 3 seconds.
seconds to add additional rinses to the cycle.
TM
except the Power button.
remaining time are alternately shown on the
display during the wash cycle.
You must deactivate this function before you can
access any other options and functions.
Turn on the power.
OPERATION
31
TM
button for 3
TM
.
and the
CL
Advertisement
Table of Contents
