Kenwood SS-992 Instruction Manual page 11

—@ Operation of Dolby Surround playback
(DOLBY PRO LOGIC) POWER switch CENTER LEVEL keys
When video software carrying "D0 [DOLBY SURROUND ]" mark is
played, this mode provides the similar Dolby Surround effect
to movie theaters.
VOLUME CONTROL
Display
DELAY TIME keys
(-,+) CENTER MODE key
perform the "Dolby Surround field adjustment" proce- TEST TONE keys ees tae oy
dure. (ON/OFF,MODE})
Before using the Dolby PRO LOGIC mode, be sure to
SURROUND
Main unit
Every time the key is pressed, the surround mode is
switched.
SURROUND
STEREO
DOLBY DOLBY
Remote control unit = —+ HALL —> THEATER
provided with amplifier | SURROUND 3STEREO |
Every time the key is pressed, the center mode is
e@ Normally, the last mode used is held in memory. If it switched.
is different from the required mode, select the mode
which was used in step 2 of the "Dolby Surround field e NORMAL — WIDEBAND — PHANTOM 71
adjustment" (page 10).
3 Play a software program encoded with Dolby Surround.
4 Adjust the volume.
Adjusts the overall volume.
@ When the level balance of center and rear speakers is not good, perform the "Dolby Surround field adjustment" procedure again.
To return to normal stereo playback.
i] ag HALL
vr PAO LOGE A STEREO THEATER.
UD dal ge be
$s—992 en) 11