Related Manuals for Clark FOT-SCPD
Summary of Contents for Clark FOT-SCPD
- Page 1 FOT-SCPD FIBER OPTIC CLEANING SCOPE KIT User Guide Fiber Microscope Operation Manual...
- Page 2 Foreword Thank you for purchasing Clark Wire & Cable’s fiber optic video scope cleaning kit. Before assembling and using, please make sure that all the products and parts you have ordered are in place. Check the package carefully to avoid missing parts.
-
Page 3: Table Of Contents
Table of Contents Product introduction and performance indicators --1 Main features --------------------------------------------5 General description -------------------------------------7 Instructions ---------------------------------------------11 Technical Parameters ---------------------------------13 Accessories and configuration ----------------------16 Warranty service --------------------------------------17 User guide----------------------------------------------18 Product introduction performance... - Page 4 indicators The hand-held fiber optic microscope is portable, and the image is easy to observe with output to the display as a video signal, so that the condition of the fiber end face is clear. The product is used for fiber inspection and cleaning.
-
Page 5: Main Features
Engineering Applications Patch panel inspection Many patch panels are designed to facilitate the detection of the connector at the front end, while the connector at the rear end is difficult to detect. The traditional fiber end detector can only conveniently detect the front-end connector of the patch panel. - Page 6 2. Use aviation electrical interface for more stable connection According to customer feedback, the aviation electrical interface was used to provide a more stable connection and a longer service life. Whether in the factory environment or on the engineering site, our fiber end face detectors always guarantee a stable and clear image.
-
Page 7: General Description
General description Handheld fiber optic microscope consists of three parts. A. Detection host (handle part) B. Display section C. Test probe section A. Inspection Probe The fiber optic microscope handle has a built-in analog signal CCD that outputs NTSC or PAL signals via a 5-pin aeronautical connector. - Page 8 a 1. Test probe kit. Test probes are used to mount different fiber adapters to detect FC, SC, ST, LC, E2000 and other custom-made PC, UPC or APC fiber connectors. a 2. Focus dial. The fiber microscope magnification is set to 250 times by default.
- Page 9 C. Test probe section The tip is connected to the front end of the microscope as a test transducer and is also a test probe. The thread of the test probe is connected to the front of the lens. Before testing, be sure to select and install the test probe.
- Page 10 Microscope test probe tips 2.5-U-M 1.25-U-M （2.5mm PC male adapter） （1.25mm PC male adapter） SC-U-F LC-U-F SC/PC female adapter LC/PC female adapter When measuring the fiber end faces of different adapters, the corresponding tips need to be replaced. The tip and the adaptor work in conjunction with each other.
- Page 11 1. Component installation Mount the test probe to the proper tip. Standard component installation Do not try to rotate the test probe away from the test port. This will damage the entire fiber microscope lens. 2. Display viewing and control Used in conjunction with a fiber optic microscope handle.
- Page 12 Tap the “Power On/Off” button to turn the switch on and off. 5. Photo and video Photo: Press the photo button to take a photo. The photo file is saved in the DICM folder of the TF card. Video: Press the video button to start and end the video.
-
Page 13: Technical Parameters
9. Charging Please use the adapter or mobile power to connect to the Micro USB cable for charging. The charging voltage and current are 5V / 1A. Technical Parameters amplification 400X (9" display) 200X (3.5" display) Resolution 0.5μm screen size 3.5"... - Page 14 configuration) Item model description 2.5-U-M Test: PC connector for （2.5mm PC male FC/SC / ST / E2000 fiber connector） patch cord 1.25-U-M Test: PC connector for （ 1.25mm PC male LC/MU fiber patch cord connector） 2.0-U-M Test: 2.0mm male pin SMPTE male pin SC-U-F Test: Fiber jumper...
- Page 15 Item model description 2.5-A-M Test: APC connector for （2.5mm APC male FC/SC / ST / E2000 fiber connector） patch cord 1.25-A-M Test: APC connector for （1.25mm APC male LC/MU fiber patch cord connector） FC-A-F Test: Fiber jumper （FC/APC female connector inside FC/APC adapter）...
-
Page 16: Accessories And Configuration
Accessories and configuration Item model Function Description Standard configuration: One test handle, one host, one Fiber 2.5-U-M adapter, one 2.0-U-M, Microscope one 1.25-U-M adapter, one Operation SC-U-F adapter, one 2.0-U-F, and one LC-U-F adapter Adapter head option: 2.5mm APC male adapter Other options 1.25mm APC male adapter list... -
Page 17: User Guide
We guarantee that the user will enjoy the one-year warranty from the date of sale, and we guarantee that the device will work properly if it meets the applicable specifications. During this time, we will repair or replace the returned product for free. Important: The following conditions are not covered by the warranty •... - Page 18 Fiber optic cleaning series FC/SC/ST/E2000 Fiber Cleaning Pen Dirt on the fiber adapter head can be removed with a single touch. “One button clear” is a new high performance, high efficiency fiber adapter head cleaning tool. Please read the operating instructions carefully before using this product.
- Page 19 Save instructions Do not expose this product to direct sunlight, high temperatures or humidity. When not making When using this product, fasten the cap on the guide cover. Features Cleanable APC and UPC connectors; comfortable design, easy to operate; precise cleaning, long-term maintenance;...
- Page 20 Application...
- Page 21 When inserting the adapter, be careful not to tilt the “one-click” cleaning rod. When inserting, do not use excessive force, otherwise it will damage the adapter head and the "one press clear" cleaning rod. If the push case is blocked, remove the adapter on the “one press”...
- Page 22 Save instructions Do not expose this product to direct sunlight, high temperatures, or moisture. When not making When using this product, fasten the cap on the guide cover. Features Cleanable APC and UPC connectors; comfortable design, easy to operate; precise cleaning, long-term maintenance;...
- Page 23 Product specifications Cleaning range: 17.5X17.5mm Length: 172 mm Extended length: 252 mm, adjustable top from 40 mm to 80 mm to clean deep position. Application...
- Page 24 When inserting the adapter, be careful not to tilt the “one-click” cleaning rod. When inserting, do not use excessive force, otherwise it will damage the adapter head and the "one press clear" cleaning rod. If the push case is blocked, remove the adapter on the “one press”...
- Page 25 Fiber Optic Connector Cleaner Scope of application The cassette type optical fiber cleaner is composed of a casing, a rotating mechanism, a thrust mechanism, and a cleaning belt. The cleaning belt is woven with special fiber, and has good water absorption, dust removal effect and antistatic function.
- Page 26 Operation guide Single-handle box, rub the fiber port up, thumb on the spin-back button → push the thumb down to push the button, the cleaning port appears two cleaning slots → the right hand-held fiber, put the fiber head at the beginning of one of the cleaning slots Slide in one direction in the slot until the end of the slot →...
- Page 27 Effect test The cleaning effect of the product can be evaluated by the fiber end face detector. The enlarged photo before cleaning, as shown in Figure 1, can be seen that the obvious dirt adheres to the surface of the connector;...
- Page 28 WWW.CLARKWIRE.COM 1(800) CABLE-IT...
Need help?
Do you have a question about the FOT-SCPD and is the answer not in the manual?
Questions and answers