Download Print this page

Pioneer SA-8800 Service Manual page 7

Advertisement

SA-8800
@
PHONO INTERFERENCE FILTER SWITCH
This is used to attenuate radio-frequency inter-
ference
from
external
electronic
or
electrical
appliances or products during record-play.
When this switch is set to ON during record play
with the cartridge load resistance switch is at
100
position, the sound volume will be reduced.
@
PHONO 1 JACKS
Connect
the
turntable
output
cords
to these
jacks.
@) PHONO 2 JACKS
Connect
your second turntable output cords to
these jacks.
@ TUNER JACKS
Connect the tuner cords to these jacks.
®© AUX JACKS
These are auxiliary input jacks. Connect
a TV
tuner or cartridge tape player to them.
@® PREAMPLIFIER/POWER AMPLIFIER
CONNECTOR BAR
When this connector bar is disconnected from the
jacks, you
can
separate
the
SA-8800's
pream-
plifier and
power
amplifier.
For
normal
use,
however, it is connected.
NOTE:
If this
bar
is not
connected
properly,
you
will not
hear
any
sound
from
the speakers
connected
to the
SPEAKERS
terminals.
@ SPEAKERS TERMINALS A
Connect your first pair of speakers to these ter-
minals.
SPEAKERS TERMINALS B
Connect. your second
pair of speakers to these
terminals.
Fa are
akens—
Nopog
a_i
Fi
aaa
3
eaaa|a) fase
omnis __si__at
Serial number plate
@ GND TERMINALS
These
are
the
ground
terminals.
Connect
the
ground wire of the turntable, etc. to these ter-
minals.
TAPE 1 JACKS
Connect
the
tape
deck
cords
to these jacks.
Connect the REC (recording) jacks to the INPUT
jacks on the tape deck, and the PLAY (playback)
jacks to the OUTPUT jacks.
@ TAPE 2 JACKS
Connect
your second
tape deck
cords to these
jacks. Connect the REC (recording) jacks to the
INPUT
jacks on the tape deck, and the PLAY
(playback) jacks to the OUTPUT jacks.
@ AC OUTLETS
These are spare power outlets. Insert the power
plug on the stereo components (turntable, tuner,
tape deck, etc.) into these outlets.
SWITCHED:
The power supplied through these
outlets is coupled to the operation of the
amplifier's
power
switch.
The
maximum
power capacity which may be connected to
the two
SWITCHED
outlets
is 200W
(For:
the Canadian
model,
the maximum
power
capacity is 1OOVA).
UNSWITCHED:
The
power
is always
supplied
through these two outlets regardless of the
position of the power switch. The maximum
power capacity which may be connected to
these two outlets is 200W (For the Canadian
model, the maximum power capacity is 100
VA).
;

Advertisement

loading