Testing Application In Siemens Tia V16; Modbus Rtu Master Mode - odot DPM01 User Manual

5 Testing application in Siemens TIA V16

This chapter will use SIEMENS CPU 315-2 PN/DP as the PROFIBUS Controller and
TIA as the configuration software to illustrate the configuration method of DPM01.

5.1 Modbus RTU Master Mode

1. Download the GSD folder of DPM01 from the official website and confirm that
there are the following files in the folder. If not, please contact the supplier to request
them.
2. Open TIA V16 software, create a new project named DPM01-TEST, with no
Chinese characters in the storage path. Click Create and then click on the project view
in the bottom left corner.
http: // www.odotautomation.com TEL: +86-0816-2538289
34 / 76