Modbus Rtu Slave Mode - odot DPM01 User Manual

4.2 Modbus RTU Slave Mode

1.Modbus Slave Mode Data Address Table
Data area
Zone 0（0XXXX）
Zone 1（1XXXX）
Zone 3（3XXXX）
Zone 4（4XXXX）
2→10 Refer to 4.1 (Master Station Mode)的1→9。
11. Double click on the gateway icon and the following configuration will
appear.
Click "Assign Parameters" again to set the Modbus parameters for the gateway
(which must match the RS485 device connected to the user). After setting, click the
"OK" button, as shown in the following figure:
http: // www.odotautomation.com
Effective address range
27 / 76
0～1951
0～1951
0～121
0～121
TEL: +86-0816-2538289