Power Supply Faults are flagged when a power supply is activated. During a Power
Supply Fault, the PS LED will blink at a slower rate. While the PS LED is blinking, the
Mute LED's will indicate which fault triggered as noted below:
CH1 Mute LED: PS Voltage Fault
CH2 Mute LED: PS Bias Voltage Fault
CH3 Mute LED: PS Breaker Tripped
CH4 Mute LED: PS DC Fault
CH5 Mute LED: PS Voltage Fault (repeated)
CH6 Mute LED: PS Bias Voltage Fault (repeated)
CH7 Mute LED: PS Breaker Tripped (repeated)
CH8 Mute LED: PS DC Fault (repeated)
Channel Faults are flagged when a channel is Active. During a Channel Fault, the
corresponding channels Fault LED will light, the channel will shutdown and not pass audio.
The channel will try to recover from the fault and activate automatically. The following
items are recognized as Channel Faults:
Over Current Fault
Full limiter attenuation
Thermal
Initialization
CKd Series Owners Manual v1e
CKd Owner's Manual
Page 24